Felix Tec Series Tech Specs – FELIXprinters

Felix Tec Series Tech Specs

FELIX Tec 4 A 3D printer to rely on.

Printer Name

FELIX Tec 4

Physicial Properties

Print Size
Weight
450 x 410 x 520 mm
Approx. 10 kg

Build Volume

Size (X, Y, Z)
255 (*240 dual head) x 205 x220 mm

Printer and printing properties

Name of productFELIX Tec 4 Dual Head
Print TechnologyFused Filament Fabrication
Layer resolution

 

Low250 microns
Normal200 microns
High150 microns
Very High100 microns
Extreme50 microns

 

Build plateHeated platform
1 Flexible BuildPlate
Max. temperature 90 °C
Build plate levelingSemi-automatic (induction sensor)
2 manual leveling wheels
Print head2 full metal print head (including teflon tubes)
Build speed0.35mm nozzle upto 15 mm3/s
(ABS @ 250°C)
Print head travel speedUp to 200 mm/s
Filament feeder typeDirect geared extruders
Nozzle diameter0.35 mm standard for both nozzles (0.25, 0.5, 0.7 mm optional)
XYZ resolutionXY, 13 microns
Z: 04 micron
XYZ typical print accuracy+/- 0.1mm for objects up to 100 mm
Nozzle temperaturesUp to 275 °C
Nozzle heatup timeApprox 1.5 min @ 200 °C
Buildplate heatup timeApprox 2.5 min to 60 °C

Upgradability

Upgradable Yes, to next gen Tec Series,
FELIX Cover Unit (optional)
Expansions Paste Extruder (optional),
WiFi Unit The Element (optional)

Materials

SystemOpen filament system, use filament from any supplier
Filament diameter1.75mm
Supported materialsRecommended: PLA, PETG, ABS,PVA, FLEX
Specials: Any filament which melts under 275 °C

Software Requirements

SoftwareRepetier-Host for FELIXprinters, downloadable from our website (open source)
Simplify3D is recommended (not included)
Supported OSWindows 7 and upwards
Mac OS X or higher
Linux (Repetier-Host)
Supported file typesSTL, AMF, OBJ, 3DS
Printer communicationUSB
Standalone via micro SD card (included)

Hardware Requirements

Input 
Line voltage100 – 240V (AC)
Frequency50 – 60 Hz
Power usage250 W max.

Operating conditions

Operating ambient temperatures15 to 32 °C
60 to 90 °F
Storage temperatures0 to 32 °C
32 to 90 °F

Service and Support

Warranty12 month limited warranty. (Wearable parts excluded e.g. hot-ends)
Lifetime supportExpert technical support via email, phone and skype. Also our global community is available to help you.
Extended supportOnline support pages, our knowledgebase and clear manuals, tips and tricks to get the most out of your printer.
Safety and complianceCE declaration of conformity
Included in the box
  • FELIX Tec 4 Dual Head Assembled
  • Small tool kit
  • Starter filament set
  • AC Power supply cord
  • USB cable
  • QuickStart Guide