See the Pro XL 4.0 print at Formnext 2026 · Frankfurt, 17–20 November · Hall 12.1, stand B65
Industrial FDM
600 × 385 × 600 mm build volume, CoreXY speed and integrated drying. An industrial FDM printer that keeps running.
Build volume
600 × 385 × 600 mm
Print speed
up to 500 mm/s
Nozzle
up to 350 °C
Heated bed
up to 110 °C
CoreXY motion on Klipper. Up to 500 mm/s at 1G acceleration, with GT3 belts for stiffness and long life.
Two drying cabinets built into the sides. Your material stays print-ready.
Quickswap print head module, high flow as standard.
Applications
Test full-size parts, in one piece.
Printed on FELIX
Print the part that goes into the product, in series.
Printed on FELIX
Gears, housings and brackets that do real work.
Printed on FELIX
Production aids
Made in-house, when the line needs them. Tools and moulds for your own production.
Features
Everything an operator touches ten times a day is designed to be quick, clean and safe.
Easy access
The top lid opens on a gas spring and the front door closes softly. Loading filament, swapping a plate or checking a print takes seconds.
Control
A touchscreen on the machine, a webcam and full print management over the network. With an emergency stop circuit within reach.
110 °C
With a removable magnetic flex plate. Bend it and your part pops off.
350 °C
A nozzle that handles technical filaments.
2 cabinets
Built into the sides, so your filament stays print-ready.
No run-outs
No silent run-outs halfway through a long print.
Resume
Pick up where you left off after a power cut.
Cleaner air
Filtered air around the machine.
FELIX Pro XL 4.0
| Build volume | 600 × 385 × 600 mm |
| Motion | CoreXY, GT3 belts |
| Firmware | Klipper |
| Print speed | up to 500 mm/s |
| Acceleration | 1G |
| Nozzle temperature | up to 350 °C |
| Bed temperature | up to 110 °C |
| Build plate | removable magnetic flex plate |
| Print head | quickswap module, high flow standard |
| Drying | 2 integrated drying cabinets |
| Sensors | filament detection, power loss recovery |
| Interface | touchscreen, webcam, network print management |
| Safety | emergency stop circuit, air filter |
Pro XL 3.x owners
Spare parts stay available in the shop. Ask us about moving up to the 4.0.
Why FELIX
Modular, upgradeable and open. Training, service and support from the people who build it.
See it print
Formnext 2026, Frankfurt, 17–20 November, hall 12.1, stand B65. Or see it run in IJsselstein.