The small refillable spray works very well to clean the print bed. Fill it with cleaning liquid (recommended: Denatured alcohol/Blue spirit) and spray a bit on top of the print bed each time before you start a new print.
Tweezers make it much easier to carefully peal of a 3D printed object from the print bed. It is also a very useful tool to remove any filament residue from the hot-ends.
During normal usage the kapton foil will be of good quality for a long time. If it occurs the foil gets damaged or you start to see ‘shadows’ from previous prints, you might want to change the current foil for a new one.
Filament Dust Cleaners
The Dust Cleaners are placed in the guidance tool that guides the filament to the hot-ends. Filament is very often loaded with static electricity, causing dust to stick to the filament. To prevent any dust to be taken into the hot-ends, dust cleaners are used. To make sure the filament will be guided to the hot-ends without any dirt, new dust cleaners need to be placed in the guidance tool once in a while.
The FELIX Starter Set contains the following items:
3 x Kapton sheet (Foil which is placed on top of the print bed)
1 x Set of filament dust cleaners (cleans the filament before entering the print head)
1 x refillable spray container for cleaning liquid (container is shipped empty due to legislation)
1 x Tweezers (to precisely remove objects or remove material from the hot-ends)