Upgrades

One of the benefits of modern three-dimensional printing technology is that it is quite scalable. At Felix Printers, we offer a wide selection of 3D printer upgrades that can enhance and streamline any build process. This can help enhance the functionality of a current printer while allowing a cost-effective alternative to purchasing an additional standalone unit.

Grid List

Set Descending Direction

1-12 of 17

Page:
  1. 1
  2. 2
  1. Upgrade set Tec 4 to Tec 4.1

    Upgrade set Tec 4 to Tec 4.1

    €64.50
    (Excl. VAT)

    | Add to Compare

    Enjoy improved print quality, with the Tec 4 to Tec 4.1 upgrade set. Better overall cooling performance and more stable mounting of the z-probe enable better print quality and z-probe performance.

    Download the upgrade manual here

    Learn More
  2. Upgrade single to dual head FELIX 3.2

    Upgrade single to dual head FELIX 3.2

    €130.00
    (Excl. VAT)

    | Add to Compare

    Upgrade package to upgrade your FELIX 3.2 from single to dual head.

    This upgrade kit does not contain any plastic parts. It is assumed you have a DIY kit, where you already have the plastic parts required to do the upgrade.

    Learn More
  3. FELIX Pro Series - Touchscreen & Webcam - Pro 3

    FELIX Pro Series - Touchscreen & Webcam - Pro 3

    €345.00
    (Excl. VAT)

    | Add to Compare

    Add the new FELIX Pro Touchscreen to your FELIX Pro and have the full PRO experience. Thanks to the intuitive interface the screen is incredibly easy to operate. With it's built in (WiFi) webbased control you can control your 3D printer from any browser.

    Learn More
  4. Upgrade service Pro x to Pro 3

    Upgrade service Pro x to Pro 3

    From: €829.50

    To: €1,348.50

    (Excl. VAT)

    | Add to Compare

    Leadtime approx. 2 weeks

    Benefit from better performance with the FELIX Pro 3.
    The Pro 1/2 to Pro 3 upgrade gives several benefits:

    - Improved print quality.
    - 2 times faster dual head print speed.
    - Lower maintenance cost
    - Improved reliabitity
    - Complete checkup of your printer

    For a more detailed description please continue reading in the description below.


    Upgrade service executed by FELIXprinters
    If you purchased your FELIX Pro Series directly from us or there is no local authorised reseller near you, we can also upgrade your Pro Series for you. Our skilled technicians will make sure your 3D printer will be shipped back to you in an as good as new condition.

    Upgrade services at your local reseller

    The upgrade of your FELIX Pro can be executed by your local reseller. (check for availability)

    Find your local reseller

    Learn More
  5. Bed/plate upgrade Pro x to Pro 3

    Bed/plate upgrade Pro x to Pro 3

    From: €279.00

    To: €879.00

    (Excl. VAT)

    | Add to Compare

    Benefit from better performance with the Bed/Plate upgrade from FELIX Pro 2 to Pro 3.

    Order as sub-assembled set for DIY upgrading. If you order the DIY kit, select 'ship yourself' option for shipping. Standard shipping cost will apply.

    - New bed including magnets, top foil and heater foil.
    - New bed-support including small motors.
    - New flex plate including kapton tape.
    - New cabling: improved cable management for y-axis, better wires and also different guiding for improved long term reliability.

    Additionally order servicing and we'll do the upgrade for you. The upgrade is done in our workshop in The Netherlands by one of our experts, and your printer will be serviced as well. 

    Learn More
  6. Upgrade Pro x to Pro 3 - DIY

    Upgrade Pro x to Pro 3 - DIY

    From: €6.00

    To: €1,314.00

    (Excl. VAT)

    | Add to Compare

    Leadtime approx. 2 weeks

    Benefit from better performance with the FELIX Pro 3.
    The Pro 1/2 to Pro 3 upgrade gives several benefits:

    - Improved print quality.
    - 2 times faster dual head print speed.
    - Lower maintenance cost
    - Improved reliabitity
    - Complete checkup of your printer

    For a more detailed description please continue reading in the description below.


    NOTE this is a DIY kit.
    To make life easy, we preassembled all subassemblies for you. Depending on your skills and the chosen product configuration, the time it takes to complete the upgrade is about 1 to 4 hours.

    Learn More
  7. FELIX Tec 4 - bed assembly 1

    FELIX 3 to TEC 4 - Build Platform Upgrade

    As low as: €149.50

    (Excl. VAT)

    | Add to Compare

    The new Tec 4 build platform is designed to provide the best 3D printing surface for your FELIX.  provide optimal use of the available space and use as less material as possible. The lightweight aluminium sandwich plate includes a strong heater which is capable of heating the surface up to 90 degrees celsius.

    Many years of experience and developing lead to a slim and steady print platform, providing optimal use of the available space and use as less material as possible.

    The lightweight aluminium plate is cleverly designed in many ways: the eye-catching layout of the platform is designed to reduce unused space and to keep the construction as light as possible. The platform contains a heater element which can heat the platform up to 90C, making it possible to print with challenging materials.

    NOTE: Kapton sticker is NOT standard included. 

    Dial buttons for calibration
    The two large dial buttons mounted on top of the build plate allow for easy and precise calibration, which is essential for high quality 3D printing. 

    FELIX Flexible BuildPlate (optional) 
    The Tec 4 build plate requires the Flex Plate to print on. The Flex plate is a flexible plate which allows for easy removal of the printed object. Sometimes prints can be very well connected to the build surface, bending the Flex plate will release the print without using a lot of force. Magnets integrated into the Tec 4 build platform will make sure the Flex plate will always stay in place during printing.

    Learn More
  8. Filament roll holders including bearing

    Filament roll holders including bearing

    €34.50
    (Excl. VAT)

    | Add to Compare

    An improved version of the regular filament holder for the Pro and Tec series.

    Benefit from an increased print quality, reduction of tangled spools and improved reliability for printing the most flexible materials.

    Learn More
  9. FELIX 3.0 To Tec 4.1 Upgrade Kits

    FELIX 3.0 To Tec 4.1 Upgrade Kits

    From: €428.50

    To: €834.50

    (Excl. VAT)

    | Add to Compare

    Attention: this upgrade kit is only compatible with FELIX 3.0.

    The brand-new FELIX Tec 4 upgrade takes your FELIX to a whole new level of possibilities. Many years of developing with our dedicated community, has led to a 3D printer with tailored features and new possibilities. The Tec 4 upgrade is a leap forward in technology and the best tool you can have to create your designs in an efficient, effective and affordable way.

    Learn More
  10. FELIX 3.1 to Tec 4.1 Upgrade Kits

    FELIX 3.1 to Tec 4.1 Upgrade Kits

    As low as: €399.00

    (Excl. VAT)

    | Add to Compare

    Attention: this upgrade kit is only compatible with FELIX 3.1.

    The brand-new FELIX Tec 4 upgrade takes your FELIX to a whole new level of possibilities. Many years of developing with our dedicated community, has led to a 3D printer with tailored features and new possibilities. The Tec 4 upgrade is a leap forward in technology and the best tool you can have to create your designs in an efficient, effective and affordable way.

    Learn More
  11. FELIX Tec 4 Single to Tec 4 Dual upgrade kit

    FELIX Tec 4.x Single to Dual Upgrade Kit

    €130.00
    (Excl. VAT)

    | Add to Compare

    The FELIX Tec 4 Single to Dual upgrade kit contains a second print head which can be installed onto your FELIX Tec 4. Having two print heads onto one machine adds a whole lot of possibilities: creating complex shapes, multi-material prints or a dedicated print head for a specific material. The upgrade is a Do-It-Yourself (DIY) installation and takes about 3 hours to complete. 

     

    Create Complex geometries with soluble support material

    Need to create complex shapes, challenging bridges or parts with small internal compartments? Load water soluble support material into the second print head to create the most complex geometries. The Tec 4 Single to Dual upgrade kit, adds a second full metal and durable print head to your Tec 4, opening a whole range of new possibilities.

    Support material can be washed out by leaving it in clean water for several hours.

     

    Two print heads to create it all   

    Combining two different materials into one print is one of the main benefits of having two individual print heads. Combine standard PLA with a flexible material, add a transparent part into your print or use a wood fill surface for certain parts. Combining two materials into one print definitely doubles the fun and possibilities.

     

    A dedicated print head 

    Besides combining materials two individual print heads can also be used to dedicate each print head to a specific material. Certain materials may leave traces behind inside the print head, causing ‘dirt spots’ in prints if another material is loaded. Having a specific print head for one material, will make sure your prints will come out nice and clean. 

    Learn More
  12. Upgrade kit Felix 2.0 to Felix 3.1

    Upgrade kit Felix 2.0 to Felix 3.1

    As low as: €189.50

    (Excl. VAT)

    | Add to Compare

    It is finally here, the upgrade kit to the FELIX 3.1. Enjoy the print-quality of the latest generation FELIXprinters. Due to the modular design of the printer, you are free to choose to what extent you want to upgrade your printer, we just choose the bare minimum for you. This upgrade enables a significant boost in print-quality and reliability. This is enabled not only by using high quality engineering plastics but also every part has been redesigned compared to it's predecessor to increase rigidity of the construction.

    Learn More

Grid List

Set Descending Direction

1-12 of 17

Page:
  1. 1
  2. 2
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x