Spare parts

Grid List

Set Descending Direction

1-12 of 42

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. 2 x Bearings

    Mechanical Parts Filament Roll Holder - New Design

    €9.50
    (Excl. VAT)

    | Add to Compare

    The filament spool holder with bearings is designed to unwind filament as smoothly as possible. The use of high quality bearings ensures a smooth flow of filament. 

    The mechanical parts set for the filament roll holder with bearing contains the following items: 

    Pro 3: 

    • (2x) Bearing MR6804-ZZ 32x20x7
    • (2x) M4 x 8
    • (2x) T-Nut 5St M4
    • (2x) Head cap screw M4 x 25

    OR

    Tec 4: 

    • (2x) Bearing MR6804-ZZ 32x20x7
    • (2x) M4 x 16 Ball Head
    • (2x) T-Nut V8 StM4
    • (2x) Head cap screw M4 x 25

     Attention: you will need to print the plastic parts yourself. This item does not contain the printed parts.  

    Click here to download the STL Files for the spool holder

    Learn More
  2. Tooth Belt GT2 - 2500mm - 9mm - Pro L/XL

    Tooth Belt GT2 - 2500mm - 9mm - Pro L/XL

    €18.50
    (Excl. VAT)

    | Add to Compare

    The HTD GT2 belt is used to move the printer head over the print bed. The belt is capable of high torque transfers and the formfactor ensures good grip.

    Compatible with both FELIX Pro L/XL coreXY system

    • Belt width: 9 mm
    • Belt length: 2500mm
    Learn More
  3. FELIX TEC 4 - LCD control Panel

    FELIX TEC 4 - LCD control Panel

    As low as: €70.00

    (Excl. VAT)

    | Add to Compare

    The LCD screen and easy to use rotary button to control your FELIX Tec 4 3D printer. The bright LCD screen provides a clear view of the current status of your 3D print. Navigating through the menu goes very smoothly with the rotary button. While rotating the button provides a convenient amount of feedback to make navigation as user friendly as possible.

    Learn More
  4. Filament roll holders including bearing

    Filament roll holders including bearing

    €34.50
    (Excl. VAT)

    | Add to Compare

    An improved version of the regular filament holder for the Pro and Tec series.

    Benefit from an increased print quality, reduction of tangled spools and improved reliability for printing the most flexible materials.

    Learn More
  5. Stepper motor Nema 17, 40 mm

    Stepper motor Nema 17, 40 mm

    From: €12.50

    To: €13.50

    (Excl. VAT)

    | Add to Compare

    This is a NEMA 17 Stepper Motor with 6 pins JST connector. It is compatible with all FELIXprinters and this type is used since the release of the FELIX 2.0.

    The NEMA 17 Stepper Motor can be purchased with or without the cable. 

    Learn More
  6. Tec4-hot-end

    FELIX Tec - Full Metal Hot-End

    €95.00
    (Excl. VAT)

    | Add to Compare

    The all metal Tec 4 print head is designed to deliver the best possible 3D print performance on a FELIX 3D printer. the metal body of the print head is a huge step to improve overal reliability, especially for very long print jobs. The sophisticated design of the print heads results in a smooth flow and heat up of filament, which finally results in highly detailed 3D prints. The exchangeable nozzle and heater body results in broad variety of nozzle diameters and in easy maintenance.

    Learn More
  7. FELIX Pro / Tec 4 - Hot-end Nozzle (standard)

    FELIX Pro / Tec 4 - Hot-end Nozzle (standard)

    €15.00
    (Excl. VAT)

    | Add to Compare

    Note: this nozzle only works with the FELIX Pro 1 and the FELIX Pro 2

    This is the standard nozzle for FELIX Pro Series. The diameter of this nozzle is 0.35 mm. The Hot-end nozzle is the part where the filament leaves the extruder. The tip is made out of brass to ensure constant and reliable performances.

    Learn More
  8. FELIX Pro / Tec 4 - Hot-end Nozzle (0.5 mm)

    FELIX Pro / Tec 4 - Hot-end Nozzle (0.5 mm)

    €15.00
    (Excl. VAT)

    | Add to Compare

    Note: this nozzle only works with FELIX Pro 1 and FELIX Pro 2

    The FELIX Pro Series 0.5 mm nozzle is very useful when printing with special filaments or to improve print speed. The 0.5 mm nozzle for FELIX has a bigger extruder hole than the standard 0.35 mm nozzle, allowing more room for specific adjustments and a bigger flow of filament. The 0.5 mm nozzle is the perfect solution to improve print speeds with relatively little loss in detail.


    The bigger extruder hole of the 0.5 mm nozzle has various advantages when printing with specific print settings or when printing with certain filaments. Especially for special filaments the 0.5 mm nozzle shows real advantage. Special filaments include: laywood, laybrick, BronzeFill, Flex, Wood or Stainless Steel PLA.

    The 0.5 mm nozzle is made out of brass to ensure constant and reliable performances.

    Software adjustments
    In both Repetier Host and FELIXbuilder the diameter of the nozzle can easily be adjusted. In the instruction manual the steps of changing to a 0.5 mm nozzle are explained. Click here to download the software adjustment manual.

    Recommended print settings
    Click on Features (below) to read more about the recommended print settings for a selection of special filaments. 

    Learn More
  9. FELIX hardened nozzle 0.25 mm

    FELIX Pro / Tec 4 - Hardened steel nozzle (0.25 mm)

    €20.00
    (Excl. VAT)

    | Add to Compare

    When printing carbon fiber filled or abrassive material this is the nozzle you need. The stainless hardened steel which is used to manufacture this nozzle makes it incredably wear restistant. When printing the same abrassive materials with a regular nozzle you'll need 3 nozzles to complete the same amount of printing this hardened steel nozzle does.

    We took the brass nozzle design and replaced the brass by selected stainless hardened steel. With the post-processing thermal and chemical treatment these hardened steel nozzles become extremely wear resistant. 

    When working with abrasive filaments, choosing for this nozzle will be a no brainer. When comparing the durability with a regular brass nozzle you'll really see the difference in durability. This makes it a very economic product because of it's durability. In addition to that you won't need to replace your hardened steel nozzle as much as the regular brass nozzle wich saves valuable printing time. 

    Learn More
  10. FELIX hardened nozzle 0.35 mm

    FELIX Pro / Tec 4 - Hardened steel nozzle (0.35 mm)

    €20.00
    (Excl. VAT)

    | Add to Compare

    When printing carbon fiber filled or abrassive material this is the nozzle you need. The stainless hardened steel which is used to manufacture this nozzle makes it incredably wear restistant. When printing the same abrassive materials with a regular nozzle you'll need 3 nozzles to complete the same amount of printing this hardened steel nozzle does.

    We took the brass nozzle design and replaced the brass by selected stainless hardened steel. With the post-processing thermal and chemical treatment these hardened steel nozzles become extremely wear resistant. 

    When working with abrasive filaments, choosing for this nozzle will be a no brainer. When comparing the durability with a regular brass nozzle you'll really see the difference in durability. This makes it a very economic product because of it's durability. In addition to that you won't need to replace your hardened steel nozzle as much as the regular brass nozzle wich saves valuable printing time. 

    Learn More
  11. FELIX hardened nozzle 0.5 mm

    FELIX Pro / Tec 4 - Hardened steel nozzle (0.5 mm)

    €20.00
    (Excl. VAT)

    | Add to Compare

    When printing carbon fiber filled or abrassive material this is the nozzle you need. The stainless hardened steel which is used to manufacture this nozzle makes it incredably wear restistant. When printing the same abrassive materials with a regular nozzle you'll need 3 nozzles to complete the same amount of printing this hardened steel nozzle does.

    We took the brass nozzle design and replaced the brass by selected stainless hardened steel. With the post-processing thermal and chemical treatment these hardened steel nozzles become extremely wear resistant. 

    When working with abrasive filaments, choosing for this nozzle will be a no brainer. When comparing the durability with a regular brass nozzle you'll really see the difference in durability. This makes it a very economic product because of it's durability. In addition to that you won't need to replace your hardened steel nozzle as much as the regular brass nozzle wich saves valuable printing time. 

    Learn More
  12. FELIX hardened nozzle 0.7 mm

    FELIX Pro / Tec 4 - Hardened steel nozzle (0.7 mm)

    €20.00
    (Excl. VAT)

    | Add to Compare

    When printing carbon fiber filled or abrassive material this is the nozzle you need. The stainless hardened steel which is used to manufacture this nozzle makes it incredably wear restistant. When printing the same abrassive materials with a regular nozzle you'll need 3 nozzles to complete the same amount of printing this hardened steel nozzle does.

    We took the brass nozzle design and replaced the brass by selected stainless hardened steel. With the post-processing thermal and chemical treatment these hardened steel nozzles become extremely wear resistant. 

    When working with abrasive filaments, choosing for this nozzle will be a no brainer. When comparing the durability with a regular brass nozzle you'll really see the difference in durability. This makes it a very economic product because of it's durability. In addition to that you won't need to replace your hardened steel nozzle as much as the regular brass nozzle wich saves valuable printing time. 

    Learn More

Grid List

Set Descending Direction

1-12 of 42

Page:
  1. 1
  2. 2
  3. 3
  4. 4
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x