Spare parts

Grid List

Set Descending Direction

10 Item(s)

  1. FELIX Pro / Tec 4 - Hot-end Nozzle (standard)

    FELIX Pro / Tec 4 - Hot-end Nozzle (standard)

    €15.00
    (Excl. VAT)

    | Add to Compare

    Note: this nozzle only works with the FELIX Pro 1 and the FELIX Pro 2

    This is the standard nozzle for FELIX Pro Series. The diameter of this nozzle is 0.35 mm. The Hot-end nozzle is the part where the filament leaves the extruder. The tip is made out of brass to ensure constant and reliable performances.

    Learn More
  2. FELIX Pro / Tec 4 - Hot-end Nozzle (0.5 mm)

    FELIX Pro / Tec 4 - Hot-end Nozzle (0.5 mm)

    €15.00
    (Excl. VAT)

    | Add to Compare

    Note: this nozzle only works with FELIX Pro 1 and FELIX Pro 2

    The FELIX Pro Series 0.5 mm nozzle is very useful when printing with special filaments or to improve print speed. The 0.5 mm nozzle for FELIX has a bigger extruder hole than the standard 0.35 mm nozzle, allowing more room for specific adjustments and a bigger flow of filament. The 0.5 mm nozzle is the perfect solution to improve print speeds with relatively little loss in detail.


    The bigger extruder hole of the 0.5 mm nozzle has various advantages when printing with specific print settings or when printing with certain filaments. Especially for special filaments the 0.5 mm nozzle shows real advantage. Special filaments include: laywood, laybrick, BronzeFill, Flex, Wood or Stainless Steel PLA.

    The 0.5 mm nozzle is made out of brass to ensure constant and reliable performances.

    Software adjustments
    In both Repetier Host and FELIXbuilder the diameter of the nozzle can easily be adjusted. In the instruction manual the steps of changing to a 0.5 mm nozzle are explained. Click here to download the software adjustment manual.

    Recommended print settings
    Click on Features (below) to read more about the recommended print settings for a selection of special filaments. 

    Learn More
  3. FELIX 3 - Hot-end Nozzle (standard)

    FELIX 3 - Hot-end Nozzle (standard)

    €12.50
    (Excl. VAT)

    | Add to Compare

    Note: this standard mm nozzle works only with FELIX 1.0 to FELIX 3.1 series

    The Hot-end nozzle is the part where the filament leaves the extruder. The diameter of this nozzle is 0.35 mm. The tip is made out of brass to ensure constant and reliable performances.

    Learn More
  4. FELIX 3 - Hot-end Nozzle (0.5 mm)

    FELIX 3 - Hot-end Nozzle (0.5 mm)

    €15.00
    (Excl. VAT)

    | Add to Compare

    Note: this 0.5 mm nozzle works only with the FELIX 1.0 to FELIX 3.1

    The FELIX 0.5 mm nozzle is very useful when printing with special filaments or to improve print speed. The 0.5 mm nozzle for FELIX has a bigger extruder hole than the standard 0.35 mm nozzle, allowing more room for specific adjustments and a bigger flow of filament. The 0.5 mm nozzle is the perfect solution to improve print speeds with relatively little loss in detail.


    The bigger extruder hole of the 0.5 mm nozzle has various advantages when printing with specific print settings or when printing with certain filaments. Especially for special filaments the 0.5 mm nozzle shows real advantage. Special filaments include: laywood, laybrick, BronzeFill, Flex, Wood or Stainless Steel PLA.

    The 0.5 mm nozzle is made out of brass to ensure constant and reliable performances.

    Software adjustments
    In both Repetier Host and FELIXbuilder the diameter of the nozzle can easily be adjusted. In the instruction manual the steps of changing to a 0.5 mm nozzle are explained. Click here to download the software adjustment manual.

    Recommended print settings
    Click on Features (below) to read more about the recommended print settings for a selection of special filaments. 

    Learn More
  5. FELIX hardened nozzle 0.25 mm

    FELIX Pro / Tec 4 - Hardened steel nozzle (0.25 mm)

    €20.00
    (Excl. VAT)

    | Add to Compare

    When printing carbon fiber filled or abrassive material this is the nozzle you need. The stainless hardened steel which is used to manufacture this nozzle makes it incredably wear restistant. When printing the same abrassive materials with a regular nozzle you'll need 3 nozzles to complete the same amount of printing this hardened steel nozzle does.

    We took the brass nozzle design and replaced the brass by selected stainless hardened steel. With the post-processing thermal and chemical treatment these hardened steel nozzles become extremely wear resistant. 

    When working with abrasive filaments, choosing for this nozzle will be a no brainer. When comparing the durability with a regular brass nozzle you'll really see the difference in durability. This makes it a very economic product because of it's durability. In addition to that you won't need to replace your hardened steel nozzle as much as the regular brass nozzle wich saves valuable printing time. 

    Learn More
  6. FELIX hardened nozzle 0.35 mm

    FELIX Pro / Tec 4 - Hardened steel nozzle (0.35 mm)

    €20.00
    (Excl. VAT)

    | Add to Compare

    When printing carbon fiber filled or abrassive material this is the nozzle you need. The stainless hardened steel which is used to manufacture this nozzle makes it incredably wear restistant. When printing the same abrassive materials with a regular nozzle you'll need 3 nozzles to complete the same amount of printing this hardened steel nozzle does.

    We took the brass nozzle design and replaced the brass by selected stainless hardened steel. With the post-processing thermal and chemical treatment these hardened steel nozzles become extremely wear resistant. 

    When working with abrasive filaments, choosing for this nozzle will be a no brainer. When comparing the durability with a regular brass nozzle you'll really see the difference in durability. This makes it a very economic product because of it's durability. In addition to that you won't need to replace your hardened steel nozzle as much as the regular brass nozzle wich saves valuable printing time. 

    Learn More
  7. FELIX hardened nozzle 0.5 mm

    FELIX Pro / Tec 4 - Hardened steel nozzle (0.5 mm)

    €20.00
    (Excl. VAT)

    | Add to Compare

    When printing carbon fiber filled or abrassive material this is the nozzle you need. The stainless hardened steel which is used to manufacture this nozzle makes it incredably wear restistant. When printing the same abrassive materials with a regular nozzle you'll need 3 nozzles to complete the same amount of printing this hardened steel nozzle does.

    We took the brass nozzle design and replaced the brass by selected stainless hardened steel. With the post-processing thermal and chemical treatment these hardened steel nozzles become extremely wear resistant. 

    When working with abrasive filaments, choosing for this nozzle will be a no brainer. When comparing the durability with a regular brass nozzle you'll really see the difference in durability. This makes it a very economic product because of it's durability. In addition to that you won't need to replace your hardened steel nozzle as much as the regular brass nozzle wich saves valuable printing time. 

    Learn More
  8. FELIX hardened nozzle 0.7 mm

    FELIX Pro / Tec 4 - Hardened steel nozzle (0.7 mm)

    €20.00
    (Excl. VAT)

    | Add to Compare

    When printing carbon fiber filled or abrassive material this is the nozzle you need. The stainless hardened steel which is used to manufacture this nozzle makes it incredably wear restistant. When printing the same abrassive materials with a regular nozzle you'll need 3 nozzles to complete the same amount of printing this hardened steel nozzle does.

    We took the brass nozzle design and replaced the brass by selected stainless hardened steel. With the post-processing thermal and chemical treatment these hardened steel nozzles become extremely wear resistant. 

    When working with abrasive filaments, choosing for this nozzle will be a no brainer. When comparing the durability with a regular brass nozzle you'll really see the difference in durability. This makes it a very economic product because of it's durability. In addition to that you won't need to replace your hardened steel nozzle as much as the regular brass nozzle wich saves valuable printing time. 

    Learn More
  9. FELIX 3 - Maintenance and Repair Kit

    FELIX 3 - Maintenance and Repair Kit

    As low as: €55.95

    (Excl. VAT)

    | Add to Compare

    The FELIX 3 Maintenance and Repair set contains several tools to get your FELIX 3 quickly up and running again. The set contains essential spare parts which can be replaced very easily. We have selected the spare parts based on user's experience and on our knowledge of what might wear and tear due to usage. Together with the tools to perform maintenance, this is a great kit to always keep your printer going. 

     

    Items within the Maintenance and Repair Kit: 

    • 0.35 mm drill - to clean your hot-end nozzle 
    • 2 mm drill - to clean the hot-end
    • Barrel -transmits heat from the heater part to the filament 
    • Peek - isolator part between the barrel and the base of the hot-end 
    • Tip - brass tip of the hot-end
    Learn More
  10. FELIX Pro - Maintenance and Repair Kit

    FELIX Pro - Maintenance and Repair Kit

    As low as: €39.56

    (Excl. VAT)

    | Add to Compare

    The FELIX Pro Series Maintenance and Repair set contains several tools to get your Pro printer quickly up and running again. The set contains essential spare parts which can be replaced very easily. We have selected the spare parts based on user's experience and on our knowledge of what might wear and tear due to usage. Together with the tools to perform maintenance, this is a great kit to always keep your printer going. 

     

    Items within the Maintenance and Repair Kit: 

    • 0.35 mm drill - to clean your hot-end nozzle 
    • 2 mm drill - to clean the hot-end
    • Thermistor & Heater cable
    • Hot-end nozzle
    Learn More

Grid List

Set Descending Direction

10 Item(s)

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x