Spare parts

Grid List

Set Descending Direction

1-12 of 36

Page:
  1. 1
  2. 2
  3. 3
  1. 2 x Bearings

    Mechanical Parts Filament Roll Holder - New Design

    €9.50
    (Excl. VAT)

    | Add to Compare

    The filament spool holder with bearings are designed to unwind filament as smooth as possible. The use of high quality bearings ensures a smooth flow of filament. 

    The mechanical parts set for the filament roll holder with bearing contains the following items: 

    Pro 3: 

    • (2x) Bearing MR6804-ZZ 32x20x7
    • (2x) M4 x 8
    • (2x) T-Nut 5St M4
    • (2x) Head cap screw M4 x 25

    OR

    Tec 4: 

    • (2x) Bearing MR6804-ZZ 32x20x7
    • (2x) M4 x 16 Ball Head
    • (2x) T-Nut V8 StM4
    • (2x) Head cap screw M4 x 25

     Attention: you will need to print the plastic parts yourself. This item does not contain the printed parts.  

    Click here to download the STL Files for the spool holder

    Learn More
  2. Tooth Belt GT2 - 2500mm - 9mm - Pro L/XL

    Tooth Belt GT2 - 2500mm - 9mm - Pro L/XL

    €18.50
    (Excl. VAT)

    | Add to Compare

    The HTD GT2 belt is used to move the printer head over the print bed. The belt is capable of high torque transfers and the formfactor ensures good grip.

    Compatible with both FELIX Pro L/XL coreXY system

    • Belt width: 9 mm
    • Belt length: 2500mm
    Learn More
  3. Filament roll holders including bearing

    Filament roll holders including bearing

    €34.50
    (Excl. VAT)

    | Add to Compare

    An improved version of the regular filament holder for the Pro and Tec series.

    Benefit from an increased print quality, reduction of tangled spools and improved reliability for printing the most flexible materials.

    Learn More
  4. Stepper motor Nema 17, 40 mm

    Stepper motor Nema 17, 40 mm

    From: €12.50

    To: €13.50

    (Excl. VAT)

    | Add to Compare

    This is a NEMA 17 Stepper Motor with 6 pins JST connector. It is compatible with all FELIXprinters and this type is used since the release of the FELIX 2.0.

    The NEMA 17 Stepper Motor can be purchased with or without the cable. 

    Learn More
  5. FELIX 3 - Hot-end Nozzle (standard)

    FELIX 3 - Hot-end Nozzle (standard)

    €12.50
    (Excl. VAT)

    | Add to Compare

    Note: this standard mm nozzle works only with FELIX 1.0 to FELIX 3.1 series

    The Hot-end nozzle is the part where the filament leaves the extruder. The diameter of this nozzle is 0.35 mm. The tip is made out of brass to ensure constant and reliable performances.

    Learn More
  6. FELIX 3 - Hot-end Nozzle (0.5 mm)

    FELIX 3 - Hot-end Nozzle (0.5 mm)

    €15.00
    (Excl. VAT)

    | Add to Compare

    Note: this 0.5 mm nozzle works only with the FELIX 1.0 to FELIX 3.1

    The FELIX 0.5 mm nozzle is very useful when printing with special filaments or to improve print speed. The 0.5 mm nozzle for FELIX has a bigger extruder hole than the standard 0.35 mm nozzle, allowing more room for specific adjustments and a bigger flow of filament. The 0.5 mm nozzle is the perfect solution to improve print speeds with relatively little loss in detail.


    The bigger extruder hole of the 0.5 mm nozzle has various advantages when printing with specific print settings or when printing with certain filaments. Especially for special filaments the 0.5 mm nozzle shows real advantage. Special filaments include: laywood, laybrick, BronzeFill, Flex, Wood or Stainless Steel PLA.

    The 0.5 mm nozzle is made out of brass to ensure constant and reliable performances.

    Software adjustments
    In both Repetier Host and FELIXbuilder the diameter of the nozzle can easily be adjusted. In the instruction manual the steps of changing to a 0.5 mm nozzle are explained. Click here to download the software adjustment manual.

    Recommended print settings
    Click on Features (below) to read more about the recommended print settings for a selection of special filaments. 

    Learn More
  7. Extruder drive wheel FELIX Pro/Tec/3

    Extruder drive wheel FELIX Pro/Tec/3

    €6.50
    (Excl. VAT)

    | Add to Compare

    The extruder drive wheel pulls the filament into the printing mechanism. The Extruder drive wheel is made out of strong material that results in a high level of durability. The perfectly shaped teeth prevents the wheel from losing grip when pulling in the filament. Learn More
  8. Tec 4 control board

    FELIX Tec 4 - Control Board

    €295.00
    (Excl. VAT)

    | Add to Compare

    The main board is compatible with the FELIX Tec 4. 

    The main board will be send without firmware installed. Carefully read the instructions how to install the correct firmware before turning on your printer. 

    Download instructions here

    Learn More
  9. FELIX 3 - Hot-End Base

    FELIX 3 - Hot-End Base

    €12.00
    (Excl. VAT)

    | Add to Compare

    The base is the top part of the hot-end - cooling ribs are designed onto the base to maintain an excellent heat balance in different circumstances. It features as a shaft for the filament to be heated and become liquid. The Barrel is made out of high quality aluminium. Technical information: For FELIX 1.0 to FELIX 3.1 Filament diameter: 1.75 mm Learn More
  10. Powersupply - FELIX Tec & 3 Series

    Powersupply - FELIX Tec & 3 Series

    €79.95
    (Excl. VAT)

    | Add to Compare

    The powersupply is used to feed the right amount of power to the printer. To provide excellent quality,the unit is specially designed for the FELIX 3.1. Please be aware that this powersupply is ONLY usable for the FELIX 3 and newer. Not compatible with other FELIX printers or a regular PC.

    Learn More
  11. FELIX 3 - Opto Sensor (straight)

    FELIX 3 - Opto Sensor (straight)

    €6.50
    (Excl. VAT)

    | Add to Compare

    The sensors in the FELIXprinters are used for the initialisation during start-upThe wires attached to the sensor are soldered in an angle, which makes it convenient to use it for the x and the y-axis. The Opto Sensor (straight) is compatible with the electronic boards in the FELIX 2.0 up to the FELIX 3.0 Learn More
  12. FELIX 3 / Tec - Spindle

    FELIX 3 / Tec - Spindle

    €19.80
    (Excl. VAT)

    | Add to Compare

    The spindle is used to move the print bed of the FELIX printer up and down. Technical specifications: 10 mm x 2 mm 330 mm Learn More

Grid List

Set Descending Direction

1-12 of 36

Page:
  1. 1
  2. 2
  3. 3
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x