Ideal material to start printing
  • Tougher and less brittle than regular PLA

  • Virtually no warping

  • Biodegradable

  • Limited smell

FELIX PLA is the best material to start with when you are new to 3d printing. It is made from renewable resources, like corn, sugar cane etc.

Even though it is made from natural resources it is actually a very strong plastic when used below it’s glass temperature of 60 degC. For the printers prior the FELIX 3.0 we used PLA as material to print most printer parts with

Besides the mechanical properties, it is very nice that this material is bio degradable. Under normal environmental conditions PLA hardly degrades, it degrades in high humidity and also at 90 degC. Even then it takes years before fully degraded. So this commonly used filament is also suitable for outdoor applications.

Size 1.75mm
Tolerance 0.05mm
Specifc weight. 1240kg/m3
Amount on spool 1 kg
Tensile strength 110MPa
Printing temp 188 – 200 deg
Usage temp 60degC
Stiffness 8
Strength 6
Toughness 4
Printability 10
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.