Materials

FELIX GLASS
Ideal material to start printing
  • 92% light transmission, so very bright

  • Strong and flexible

  • Very good interlayer adhesion

  • Food contact acceptable

FELIX Glass is a crystal clear, strong, flexible and easy to print filament for 3D printing. These characteristics, together with the high degree of gloss, very low water absorption, practically no shrinkage or warping, very good interlayer adhesion and flame retardant properties make it a very special filament. The material is FCA (Food Contact Acceptable) approved. In short, a very diverse filament which can be used for many applications.

Size 1.75mm
Tolerance 0.05mm
Specifc weight 1010kg/m3
Amount on spool 0.5 kg
Tensile strength 26.2MPa
Elongation at break 230%
Flexural Modulus 1795MPa
Max usage temp 85degC
   
Printing temp 225 deg
Bed temp 85deg
   
Stiffness 6
Strength 10
Toughness 10
Printability 8
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x