[WIP] another direct dual extruder

This is the place to show off your felix printer hacks and improvements.
Post Reply
dognotdog
Posts: 181
Joined: Tue Sep 04, 2012 9:22 pm

Re: [WIP] another direct dual extruder

Post by dognotdog » Sun Mar 01, 2015 3:41 pm

Ok, I have re-zipped, seems like THIS TIME the archive is a bit different:
dual-extruder-again.zip
re-zipped files
(618.05 KiB) Downloaded 58 times

aikx
Posts: 45
Joined: Sun May 13, 2012 1:14 pm
Location: Cologne, Germany

Post by aikx » Sun Mar 01, 2015 6:00 pm

Only carriage.STL opens normal ( Repetier, FormZ:import ). ;-(

dognotdog
Posts: 181
Joined: Tue Sep 04, 2012 9:22 pm

Post by dognotdog » Sun Mar 01, 2015 10:00 pm

Hmm, indeed the other files crash slic3r. I wonder wtf happened to the files between then and now. I'll try and re-export the STLs in the coming days when I get the chance.

lawong
Posts: 6
Joined: Sat Jan 31, 2015 5:59 pm

Post by lawong » Fri Mar 06, 2015 5:24 am

I think there is a problem with the forum attachment system? I can download jpg and pdf but cannot open any zip files from this forum, something is corrupting them. Recommend you attach using external sites, otherwise it will negate all your hard work and nobody can test your design and give you feedback.

Post Reply