Felix 3.1 upgrade with TEC4 -Heatbed and autoleveling?

This is the place to show off your felix printer hacks and improvements.
Post Reply
otzelot
Posts: 4
Joined: Sun Feb 14, 2016 10:41 am

Felix 3.1 upgrade with TEC4 -Heatbed and autoleveling?

Post by otzelot » Fri Dec 15, 2017 7:46 am

Hello!
Is it possible to upgrade my 3.1 with the TEC4 Heatbed and autoleveling-feature?

Thanx!

Ralf

User avatar
janwijbrand
Posts: 37
Joined: Thu Dec 24, 2015 4:22 pm

Post by janwijbrand » Tue Dec 19, 2017 7:57 pm

I just received the upgrade from a 3.1 to a Tec 4 today. Looking at the parts I'd say it is not easy to only upgrade the bed-leveling as this upgrade seems tightly integrated with the upgraded parts for the new print heads and fan-arrangement.
Felix 3.1 single extruder, soon to be Tec 4 dual

User avatar
gfeliksdal
Site Admin
Posts: 400
Joined: Sat Feb 25, 2012 10:40 pm
Location: Netherlands
Contact:

Post by gfeliksdal » Tue Dec 19, 2017 10:55 pm

To do that, you need also the inductive sensor and bracket. This is something we have tought of, but not released, as it would give additional things to maintain. But if more people are interested in this, we could publish it.

Cabrio Bob
Posts: 2
Joined: Sun Dec 10, 2017 11:05 am

Post by Cabrio Bob » Sat Feb 10, 2018 11:20 am

My first post on this forum,
I'm interested in upgrade my 3.1 to tec4, bed only.
Since I use an E3D V6 I don't need the other parts.
Which parts do I need and are these available individually?

Cabrio Bob
Posts: 2
Joined: Sun Dec 10, 2017 11:05 am

Post by Cabrio Bob » Sat Feb 10, 2018 11:28 am


Post Reply