Smart Phone Camera Mount Mk I

This is the place to show off your felix printer hacks and improvements.
Post Reply
dwmartin805
Posts: 4
Joined: Tue Sep 16, 2014 3:43 pm

Smart Phone Camera Mount Mk I

Post by dwmartin805 » Mon Oct 27, 2014 2:27 am

I did this quick design of a camera mount for he Felix 3.0 Printer. Velcro works great for smart phones. The holes in the sides of the spherical joint are sized for a 1/4-20 tap. The holes in the mount are #8 flathead sheet metal screws. Use a #6 for the top one, the hole in the mating part is small.

Photo:
http://tinyurl.com/nt3pm8c

STL File:
https://drive.google.com/file/d/0B00Q4j ... sp=sharing

This is the first time lapse movie I made with the 4S as a test.
http://youtu.be/O9myKeSjiwQ

The Mark II design will follow shortly.

dwmartin805
Posts: 4
Joined: Tue Sep 16, 2014 3:43 pm

Post by dwmartin805 » Mon Oct 27, 2014 3:24 pm

The Mark II mount can be found here:

http://www.thingiverse.com/thing:517034

Post Reply