Simple E3D V6 Upgrade to our felix 3.0

This is the place to show off your felix printer hacks and improvements.
Post Reply
Pacificimc
Posts: 13
Joined: Tue Oct 22, 2013 7:43 pm

Simple E3D V6 Upgrade to our felix 3.0

Post by Pacificimc » Wed Oct 01, 2014 7:24 pm

We just bolted a aluminum hotend mounting plates to our existing Injection molded Felix 3.0 holder. It is very solid and you can remove the whole E3D very easily when needed. I think the reduction in wight of the E3D increased our print quality as well.....Thanks B
Attachments
Screen Shot 2014-10-01.png
photo-10.JPG

satoer
Posts: 436
Joined: Mon Oct 01, 2012 8:00 pm
Location: Netherlands

Post by satoer » Wed Oct 01, 2014 9:34 pm

I love the E3D hot-end! No more jaming.
Coincidently I’ve just updated my V5 design to the V6. It has a extruded filament cooler and the hotend is on the same height as the original hot end (so you won’t lose precious Z space).
http://forum.felixprinters.com/viewtopic.php?f=9&t=1078
My Felix 1.5 printed designs on Thingiverse
E3D V6 Hot end upgrade for your Felix
Tweezer bracket for your Felix
Led bar upgrade for your Felix

Post Reply