Autolift Hotend on Kickstarter

This is the place to show off your felix printer hacks and improvements.
Post Reply
Legion 2.3
Posts: 84
Joined: Sun Apr 20, 2014 6:23 pm

Autolift Hotend on Kickstarter

Post by Legion 2.3 » Sun Jul 27, 2014 12:26 pm

Dear community

I discovered a new AUTOLIFT-HOTEND :!: on Kickstarter: https://www.kickstarter.com/projects/dg ... r-hot-ends

This hotend lifts itself automatically for something like 0,5 mm when you retract the filament.
It uses a spring mechanism and micro-linear-bearings for that.

I think this could make 2 - or more - colour - printing, especially for larger objects, finally possible without the problems we actually have (scraping inactive nozzle, etc.).

Well, it´s quite expensive, but it could be a great update if it works.
I found something compareble here: http://www.youtube.com/watch?v=ARifgeNJ99E
But I didn´t find out more about this modell yet (Merlin Hotend).

What do you think, can this work? Do you see any problems at the mechanics?

seaton
Posts: 291
Joined: Tue May 14, 2013 9:04 am
Location: Bunbury, Western Australia
Contact:

Post by seaton » Tue Jul 29, 2014 8:52 am

I'd like to see something like this but incorporating a cutoff in the nozzle to prevent oozing, something like a needle valve internally
Stephen...

Felix 2.0 -> Felix 3.0 dual
Simplify3D Slicer, Kisslicer
Have you added your Felix to the Map? http://goo.gl/maps/HajnZ

http://blog.strobotics.com.au

killejano
Posts: 92
Joined: Mon Apr 01, 2013 7:23 pm

Post by killejano » Tue Jul 29, 2014 6:20 pm

The needle valve would stop oozing but the filament would stil melt to allmost liquid on the nozle causing some blobs. I've been researching a way to separate the two extruders and dumpin some filament in to some kind of ooze cup before printing again

fesch
Posts: 35
Joined: Fri Dec 05, 2014 11:14 pm
Location: Luxembourg
Contact:

Post by fesch » Mon Jan 12, 2015 11:46 am

Did somebody try one of these?

neep
Posts: 19
Joined: Sun Jan 04, 2015 12:45 pm

Post by neep » Mon Jan 12, 2015 2:24 pm

Wow, autoretract hotends. This is exactly what I think the dual extruder system needs on the Felix 3.0! Would love to see anyone have this in action...

Post Reply