Felix 2.0 sample _40x10 print problem

This is for general discussions. Also FAQ can be found here.

Moderator: speedake95

Post Reply
Asxetius
Posts: 6
Joined: Fri Jan 01, 2016 7:53 pm
Location: Greece

Felix 2.0 sample _40x10 print problem

Post by Asxetius » Sun Jan 03, 2016 11:17 pm

Hi from Greece
(sorry for my english, google translate :) )

Α week ago a good friend of mine,
he made me a gift Felix 2.0 version 3- 2-september-2013.
Used for half filament.

Software
windows 7 ultimate
repetier v.1.0.6


Sample
_40x10.stl

Slice with SFact
2_1_Normal_quality_no_support

PLA 1.75mm color RED
Print Temp 170-240C

Feedrate 100
Flowrate 100
Fan 100
Bed Temp 57
Extruder Temp 195

The final result after several printouts
Any idea?
Attachments
all.jpg
04.jpg
03.jpg
02.jpg
01.jpg
Felix 2.0

aikx
Posts: 45
Joined: Sun May 13, 2012 1:14 pm
Location: Cologne, Germany

Post by aikx » Mon Jan 04, 2016 9:54 am

Slice with SFact
2_1_Normal_quality_no_support
PLA 1.75mm color RED
Print Temp 170-240C
Feedrate 100
First reduce the distance between Hotend and bed, use a sheet of paper.
Second try a Feedrate of 50%, to see if the extruder has a problem?

Asxetius
Posts: 6
Joined: Fri Jan 01, 2016 7:53 pm
Location: Greece

Post by Asxetius » Fri Jan 08, 2016 1:52 am

Thank you very much my friend.

I reduced the distance between the hotend and bed
and the result is 100% ok :)

Best regards
Attachments
c05.jpg
c04.jpg
c03.jpg
c02.jpg
c01.jpg
Felix 2.0

Asxetius
Posts: 6
Joined: Fri Jan 01, 2016 7:53 pm
Location: Greece

Post by Asxetius » Sat Jan 09, 2016 10:45 pm

ok :)
Attachments
gear.jpg
dok.jpg
Felix 2.0

Post Reply