manual control max temp above 400 Celsius

Discussions about firmware/slicing software, tweaks and settings
Post Reply
rapid3dhu
Posts: 1
Joined: Sun Jan 19, 2014 10:20 pm

manual control max temp above 400 Celsius

Post by rapid3dhu » Wed Apr 16, 2014 9:37 am

Dear All,

We are hacking a Felix with:
20140216 - FIRMWARE - Repetier 0.91 - FELIX_3_0_SINGLE extrusion

We have to increase the extruder temperature to 450 Celsius.
We had a new thermistor, all-metal hotend, all measurements are OK, we made a new TempTable for it.

It works well after 2 weeks calibration, but we have only 1 problem:
In the Repetier Host Manual Control window (HEAT EXTRUDER BUTTON) we cannot set larger TEMP for Extruder1 than more than 400 degs. If we type more, it umps back to 400, and the arrow settings are don't work.

These are set:
#define MAXTEMP 450
#define MIN_DEFECT_TEMPERATURE -20
#define MAX_DEFECT_TEMPERATURE 450

and I cannot find more settings related to this project.

Anybody has an idea?a

Thank you very much

dognotdog
Posts: 181
Joined: Tue Sep 04, 2012 9:22 pm

Post by dognotdog » Thu Apr 17, 2014 12:14 am

You probably need to take it up with the repetier host software, not the firmware.

Post Reply