Page 4 of 5

Re: Latest Software/firmware for Felix 1.0

Posted: Sat Nov 17, 2012 5:38 pm
by satoer
Uwm… without a power supply the Felix won’t work of course. :S Allthough the Arduino Mega board should work without it.

Re: Latest Software/firmware for Felix 1.0

Posted: Mon Dec 03, 2012 7:10 am
by concar
May I have a new Topic "Latest Software/Firmware on Window for Felix 1.5" ?

I'm not sure to find the correct working software or firmware for Felix 1.5.

at the moment i use follows:

Repeter-Host v0.7c
Marlin Felix Rev E

Documentation Instruction Manual Felix 1.5 v4.pdf

on Window 7..

Thanks a lot.

Re: Latest Software/firmware for Felix 1.0

Posted: Tue Dec 04, 2012 12:34 am
by hvdd
what i use at the moment:

Repeter-Host v0.82b
Marlin Felix Rev E

Documentation Instruction Manual Felix 1.5 v4.pdf
also W7, should be ok , i think

Re: Latest Software/firmware for Felix 1.0

Posted: Wed Dec 05, 2012 8:58 am
by concar
hvdd wrote:what i use at the moment:

Repeter-Host v0.82b
Marlin Felix Rev E

Documentation Instruction Manual Felix 1.5 v4.pdf
also W7, should be ok , i think
? where you find the Repeter-Host v082b ??
Thanks.

Re: Latest Software/firmware for Felix 1.0

Posted: Wed Dec 05, 2012 11:50 am
by processware
@concar

you can find it here http://www.repetier.com/download/

Re: Latest Software/firmware for Felix 1.0

Posted: Sun Dec 09, 2012 8:51 pm
by concar
Thanks, processware..

Re: Latest Software/firmware for Felix 1.0

Posted: Tue Jan 29, 2013 1:50 am
by gfeliksdal
Dear all, together with developer of repetier, we created a new repetier-host version specific for Felixprinter users. It basically is the same as the regular repetier-host, but contains all profiles and also some new ones. The printer settings are automatically installed, so no more dragging around with sfact-profile folders. See the opening post for details.

Kind regards,

Guillaume.

Re: Latest Software/firmware for Felix 1.0

Posted: Tue Jan 29, 2013 5:38 pm
by chillkroete
Hey,

I think their is a Bug in the new Repetier-Host... everytime I start a job with normal quality the extrude wont extrude and the extrude-temperature changes to 185°C.

Greetings, Tom

Re: Latest Software/firmware for Felix 1.0

Posted: Sat Feb 02, 2013 5:28 am
by takka
The problem above with the new Repetier-Host makes it impossible to print with ABS, i really need a fix for this.

Re: Latest Software/firmware for Felix 1.0

Posted: Sun Feb 03, 2013 1:40 pm
by gfeliksdal
Hi, the problems should be solved now. To create a clean install please do the following.

The temp changes at the start of a print are caused by the forgotten to remove default start code in the gcode tab. See screenshot.
2013-02-03_133448.png
2013-02-03_133448.png (4.06 KiB) Viewed 625 times
Remove any code present.

If you want to create a clean install do the following:
-Uninstall repetierhost-Felixprinters
-open regedit.exe
Go to computer\HKEY_CURRENT_USER\Software
remove the folder repetierFELIXPrinters
- Download the latest version of repetierhost here www.felixprinters.com\downloads
- Install the file

You're ready to print again