Latest Software/firmware for Felix 1.0

Discussions about firmware/slicing software, tweaks and settings
Post Reply
satoer
Posts: 436
Joined: Mon Oct 01, 2012 8:00 pm
Location: Netherlands

Re: Latest Software/firmware for Felix 1.0

Post by satoer » Sat Nov 17, 2012 5:38 pm

Uwm… without a power supply the Felix won’t work of course. :S Allthough the Arduino Mega board should work without it.
My Felix 1.5 printed designs on Thingiverse
E3D V6 Hot end upgrade for your Felix
Tweezer bracket for your Felix
Led bar upgrade for your Felix

concar
Posts: 16
Joined: Thu Oct 25, 2012 8:50 pm

Post by concar » Mon Dec 03, 2012 7:10 am

May I have a new Topic "Latest Software/Firmware on Window for Felix 1.5" ?

I'm not sure to find the correct working software or firmware for Felix 1.5.

at the moment i use follows:

Repeter-Host v0.7c
Marlin Felix Rev E

Documentation Instruction Manual Felix 1.5 v4.pdf

on Window 7..

Thanks a lot.

hvdd
Posts: 71
Joined: Tue Jul 24, 2012 11:43 pm

Post by hvdd » Tue Dec 04, 2012 12:34 am

what i use at the moment:

Repeter-Host v0.82b
Marlin Felix Rev E

Documentation Instruction Manual Felix 1.5 v4.pdf
also W7, should be ok , i think

concar
Posts: 16
Joined: Thu Oct 25, 2012 8:50 pm

Post by concar » Wed Dec 05, 2012 8:58 am

hvdd wrote:what i use at the moment:

Repeter-Host v0.82b
Marlin Felix Rev E

Documentation Instruction Manual Felix 1.5 v4.pdf
also W7, should be ok , i think
? where you find the Repeter-Host v082b ??
Thanks.

processware
Posts: 9
Joined: Mon Nov 19, 2012 3:43 pm

Post by processware » Wed Dec 05, 2012 11:50 am

@concar

you can find it here http://www.repetier.com/download/

concar
Posts: 16
Joined: Thu Oct 25, 2012 8:50 pm

Post by concar » Sun Dec 09, 2012 8:51 pm

Thanks, processware..

User avatar
gfeliksdal
Site Admin
Posts: 402
Joined: Sat Feb 25, 2012 10:40 pm
Location: Netherlands
Contact:

Post by gfeliksdal » Tue Jan 29, 2013 1:50 am

Dear all, together with developer of repetier, we created a new repetier-host version specific for Felixprinter users. It basically is the same as the regular repetier-host, but contains all profiles and also some new ones. The printer settings are automatically installed, so no more dragging around with sfact-profile folders. See the opening post for details.

Kind regards,

Guillaume.

chillkroete
Posts: 6
Joined: Fri Aug 24, 2012 12:55 pm

Post by chillkroete » Tue Jan 29, 2013 5:38 pm

Hey,

I think their is a Bug in the new Repetier-Host... everytime I start a job with normal quality the extrude wont extrude and the extrude-temperature changes to 185°C.

Greetings, Tom

takka
Posts: 2
Joined: Mon Oct 08, 2012 4:49 am

Post by takka » Sat Feb 02, 2013 5:28 am

The problem above with the new Repetier-Host makes it impossible to print with ABS, i really need a fix for this.

User avatar
gfeliksdal
Site Admin
Posts: 402
Joined: Sat Feb 25, 2012 10:40 pm
Location: Netherlands
Contact:

Post by gfeliksdal » Sun Feb 03, 2013 1:40 pm

Hi, the problems should be solved now. To create a clean install please do the following.

The temp changes at the start of a print are caused by the forgotten to remove default start code in the gcode tab. See screenshot.
2013-02-03_133448.png
2013-02-03_133448.png (4.06 KiB) Viewed 580 times
Remove any code present.

If you want to create a clean install do the following:
-Uninstall repetierhost-Felixprinters
-open regedit.exe
Go to computer\HKEY_CURRENT_USER\Software
remove the folder repetierFELIXPrinters
- Download the latest version of repetierhost here www.felixprinters.com\downloads
- Install the file

You're ready to print again

Post Reply