KISSlicer rotation bug?

Discussions about firmware/slicing software, tweaks and settings
Post Reply
scp
Posts: 19
Joined: Mon Dec 30, 2013 1:02 am

KISSlicer rotation bug?

Post by scp » Sun Aug 10, 2014 11:11 pm

I have tried the recently uploaded new kisslicer version "20140718 - KISSlicer_1.4.4.7.zip". The name of the archive claims it's version 1.4.4.7 but actually it's only 1.4.4.6.

When I simply try to load any stl model and rotate it 90°, it actually rotates 180°. Using 45° or 270° does not help either. Is someone else seeing this effect? Is there some bugfix version available?

Regards,
Paul
Top
Dreide
Posts: 176
Joined: Sun Sep 29, 2013 12:32 am
Location: Lausanne, Switzerland

Post by Dreide » Sat Aug 16, 2014 6:52 pm

Uncheck "Auto-rotate for packing" in the "All models" menu and you should be fine.
Felix 2.0->3.0dual * Repetier (host+firmware) * KISSlicer Pro, Simplify3D * Cubify Design
Top
scp
Posts: 19
Joined: Mon Dec 30, 2013 1:02 am

Post by scp » Sat Aug 16, 2014 9:31 pm

Thanks for the hint, it solves the issue for the moment. But I still consider it a bug because the previous versions (that were available from Felix) have worked as expected, even with the "Auto-rotate" box checked.
Top
Post Reply

Return to “Software/Firmware”