What size is the felix Belt?

General discussions regarding hardware
Post Reply
Bobbystone
Posts: 23
Joined: Wed Feb 18, 2015 5:28 am

What size is the felix Belt?

Post by Bobbystone » Tue May 03, 2016 12:02 am

Hey all,

I need to order a new belt for my felix 3.0 printer and I keep getting the wrong thing I thought it was an HTD 3 x 6mm. Does anyone know the size I need to order?

Thanks!

Sander_Felix
Posts: 11
Joined: Tue Apr 19, 2016 9:06 am

Post by Sander_Felix » Tue May 03, 2016 6:56 am

Hey Bobbystone,

The tooth belt in the FELIXprinters webshop is large enough to replace both the X-axis and the Y-axis belt. Just cut the belt in half.

Webshop URL: http://www.felixprinters.com/belt-htd-3m-1-2m
Width: 6 mm
Length: 1.2 meter

Kind regards,

Sander

Bobbystone
Posts: 23
Joined: Wed Feb 18, 2015 5:28 am

Post by Bobbystone » Tue May 03, 2016 2:21 pm

Thanks Sander! DO you know what the dimensions are? I'd like to order it in the US as Im anxious to get my printer back up and running!



Sander_Felix wrote:Hey Bobbystone,

The tooth belt in the FELIXprinters webshop is large enough to replace both the X-axis and the Y-axis belt. Just cut the belt in half.

Webshop URL: http://www.felixprinters.com/belt-htd-3m-1-2m
Width: 6 mm
Length: 1.2 meter

Kind regards,

Sander

Christiaan_Felix
Posts: 3
Joined: Tue Apr 21, 2015 12:57 pm

Post by Christiaan_Felix » Wed May 04, 2016 1:30 pm

Bobbystone wrote:Thanks Sander! DO you know what the dimensions are? I'd like to order it in the US as Im anxious to get my printer back up and running!
Hello Bobbystone,

the belt is 47 inches long. and the width is 0.23 inches. Are those the dimensions you are looking for?

What I could suggest, you could also order it here, it is our USA office where you can buy spare parts :)

http://www.felixusaprinters.com

Please let us know if you require more information!

Kind regards,

Christiaan

Post Reply