0.5 nozzle for Felix Pro 1 ?

General discussions regarding hardware
Post Reply
danielkschneider
Posts: 49
Joined: Thu Apr 12, 2012 3:29 pm
Location: Geneva
Contact:

0.5 nozzle for Felix Pro 1 ?

Post by danielkschneider » Thu Oct 29, 2015 11:13 am

Hi,

is it possible to fit a 0.5 Nozzle on the Felix Pro 1's full-metal hotend ? Is the Nozzle removable ?

http://www.felixprinters.com/webshop/sp ... ot-end-421

- greetings ! Daniel

PS: My new Felix should be on its way anytime soon.

kerog
Posts: 117
Joined: Mon Jun 09, 2014 1:54 am

Post by kerog » Mon Nov 02, 2015 2:32 am

I'm pretty sure that the nozzle on the Pro 1 is removable and that the nozzles from the 3.1 and earlier will not be interchangeable with the Pro 1 nozzles. Don't know if they plan on selling other nozzle sizes with the Pro 1 or not.

-Keith

dhatw
Posts: 19
Joined: Fri Mar 29, 2013 3:25 pm

Post by dhatw » Thu Feb 11, 2016 4:52 am

I asked this same question and Felix said that they will make a 0.5 mm nozzle but it is not a priority right now.

Dhatw.

Sander_Felix
Posts: 11
Joined: Tue Apr 19, 2016 9:06 am

Post by Sander_Felix » Mon Aug 15, 2016 8:30 am

Recently we added the 0.5 mm nozzle for the FELIX Pro 1 to our webshop: http://www.felixprinters.com/nozzle-0-5mm-felixpro1

:)

Post Reply