Releasing: the .stl of FELIX 3.1 electronics cover

In here you will find news posted officially by FELIXprinters.

Moderator: speedake95

Post Reply
Felix Printers
Posts: 10
Joined: Tue Apr 08, 2014 8:38 am

Releasing: the .stl of FELIX 3.1 electronics cover

Post by Felix Printers » Tue Aug 04, 2015 9:46 am

Dear community,

The FELIX 3.1 upgrade has been released a few weeks ago. To adjust the looks of your FELIX to the recent upgrade, we are releasing the .stl of the electronics box cover. The cover contains the FELIXprinters logo and the 3.1 mark.

Have you considered using FELIXbuilder for processing the .stl file? If not, perhaps you would like to read more about our own 3D print software, you can do that here:

http://www.felixprinters.com/webshop/se ... t-software

Below the photo there is a download link to the .stl file of the FELIX 3.1 electronics cover.
Attachments
IMG_3458-1.jpg
Photo of the FELIX 3.1 electronics cover
Electronics_enclosure_F3_1_cover.STL
The .stl file of the FELIX 3.1 electronics cover.
(666.29 KiB) Downloaded 132 times

User avatar
bazis
Posts: 2
Joined: Tue Jul 04, 2017 11:51 am

Post by bazis » Tue Jul 04, 2017 12:02 pm

Can you upload stl of this plastic part? Image
Hotend calibration in my felix 3.0 is pain.

Post Reply