What kind of hotends ...

This is the place to show off your felix printer hacks and improvements.
Post Reply
Deluka
Posts: 20
Joined: Sat May 03, 2014 5:05 am

What kind of hotends ...

Post by Deluka » Wed Jun 05, 2019 8:25 pm

I want to try a other type of Hotend
I want to get one of Micro-Swiss but not sure what size i need
Anyone here Got a idea ?

seaton
Posts: 291
Joined: Tue May 14, 2013 9:04 am
Location: Bunbury, Western Australia
Contact:

Post by seaton » Tue Jul 02, 2019 8:48 am

Ive been running E3D hotend now for the last couple of years and have no problems whatsoever ever, poor to that the hotted that came with the Felix was jamming or blocking every free prints and I also could really get up to the higher temp required for nylon and ABS -

It's my "goto" hotend for all my 3D Printers. However for my Felix I used Satoers carriage and extruder mod and works a treat.
Stephen...

Felix 2.0 -> Felix 3.0 dual
Simplify3D Slicer, Kisslicer
Have you added your Felix to the Map? http://goo.gl/maps/HajnZ

http://blog.strobotics.com.au

Post Reply